Signature Products

Brake Line Clamps

Brake Line Clamps

Replace your plastic front fender brake line clips with Flipmeisters custom machined Brake Line Clamps. Flipmeisters Brake Line Clamps are machined from 303 Billet Stainless Steel with mirror polished tops and satin finished barrells.  The 2 piece design is extremely easy to install. The 13 piece kit comes complete with 2 clamps, all necessary mounting hardware, detailed installation instructions and an Allen wrench.

Low Stock

Price: $ 45.55

Flipmeisters Signature Paddock Stand Revision 4, Inception Through Late 2007, All Models

Flipmeisters Signature Paddock Stand Revision 4, Inception Through Late 2007, All Models

Introducing the Flipmeisters Signature Paddock Stand, Revision 4 for the Rocket 3, ALL MODELS THROUGH LATE 2007  Our proprietary designed stand is fabricated from Laser Cut steel and provides a convenient stand for routine maintenance or long term storage with the weight of the motorcycle relieved from the suspension.  The Revision 4 stand has removable securement pins on both ends allowing for even easier placement and removal.  The Revision 4 Paddock Stand has extended pins that accomodate the entire range of lug hole spacing…..

The Revision 4 Paddock Stand will fit any motorcycle (R3) so long as the outside dimension of the forged steel boss is 13.25″ (13 1/4″) or less.  If your outside dimension is more than 13 1/4″ (13.25″), I will be happy to fabricate a custom dimension at no additional cost to you.  Please e-mail with your requirements sales@flipmeisters.com

The Paddock Stand is designed to be driven with an ordinary 1/2″ square drive forged steel long handle breaker bar and because of the design, the breaker bar drive can be removed after the motorcycle is elevated allowing unobstructed access to the motorcycle without any obstructing lift handles in your way.

Late model R3’s, built after late 2007 with through holes less than 1/2″ (13mm) (0.500″), the through holes will require drilling with an ordinary twist drill to the required dimension of 1/2″ (13mm 0.500″).  Prior to ordering, please check your lug hole dimension to insure that it is 1/2″ (13MM).  If the lug boss holes are smaller than 1/2″ (13mm) please order the late model stand with 1/2″ drill bit included if, you do not have the required drill on hand to enlarge the lug boss holes.

Estimated shipping weight is 12 pounds per unit, packaged for shipment.

In stock for immediate shipment

Price: $ 74.90

Flipmeisters Signature Paddock Stand Revision 4 Late 07 Through Present Models

Flipmeisters Signature Paddock Stand Revision 4 Late 07 Through Present Models

Introducing the Flipmeisters Signature Paddock Stand, Revision 4 for the Rocket 3, Late 07 through present models  Our proprietary designed stand is fabricated from Laser Cut steel and provides a convenient stand for routine maintenance or long term storage with the weight of the motorcycle relieved from the suspension.  The Revision 4 stand has removable securement pins on both ends allowing for even easier placement and removal.  The Revision 4 Paddock Stanf has the same extended pin length ar the above stand to accomodate the entire range of lug hole spacingdimensions.

The Revision 4 Paddock Stand will fit any motorcycle (R3or Touring) so long as the outside dimension of the forged steel boss is 13.25″ (13 1/4″) or less.  If your outside dimension is more than 13 1/4″ (13.25″), I will be happy to fabricate a custom dimension at no additional cost to you.  Please e-mail with your requirements sales@flipmeisters.com

The Paddock Stand is designed to be driven with an ordinary 1/2″ square drive forged steel long handle breaker bar and because of the design, the breaker bar drive can be removed after the motorcycle is elevated allowing unobstructed access to the motorcycle without any obstructing lift handles in your way.

Late model R3’s as well as Touring, built after late 2007 with through holes less than 1/2″ (13mm) (0.500″), the through holes will require drilling with an ordinary twist drill to the required dimension of 1/2″ (13mm 0.500″).  The required 1/2″ (13mm) drill is included with this Paddock Stand.

Estimated shipping weight is 12 pounds per unit, packaged for shipment.

In stock for immediate shipment

Price: $ 80.17

Handlebar Wiring Clamps (2) (Brushed Finish)

Handlebar Wiring Clamps (2) (Brushed Finish)

Flipmeisters Billet Aluminum Handlebar Clamps Replace your unattractive, cheap looking, OEM plastic wire clamps with Flipmeisters Billet Aluminum Handlebar Clamps. These beautifully hand brushed  all over clamps….. are designed in 2 pieces with a recessed stainless bolt that connects the two halves together from the underside of the clamp. When bolted together, the seam is practically invisible and the clamp looks like one solid piece. These clamps will fit any brand of bike with 1″ diameter handlebars including Triumph R3, all models and years. The 7 piece kit, one pair, come with clamps, mounting hardware, allen wrench and instructions.

All Handlebar Clamp Sets will be back in stock this winter…….

Price: $ 29.99

Handlebar Wiring Clamps (2) (Machined All Over Finish)

Handlebar Wiring Clamps (2) (Machined All Over Finish)

Flipmeisters Billet Aluminum Handlebar Clamps Replace your unattractive, cheap looking, OEM plastic wire clamps with Flipmeisters Billet Aluminum Handlebar Clamps. These beautifully machined  all over clamps….. our machining process results in a polished looking finish….. are designed in 2 pieces with a recessed stainless bolt that connects the two halves together from the underside of the clamp. When bolted together, the seam is practically invisible and the clamp looks like one solid piece. These clamps will fit any brand of bike with 1″ diameter handlebars including Triumph R3, all models and years. The 7 piece kit, one pair, come with clamps, mounting hardware, allen wrench and instructions.

Currently not available…….

Price: $ 29.99

Handlebar Wiring Clamps (4) (Brushed Finish)

Handlebar Wiring Clamps (4) (Brushed Finish)

Flipmeisters Billet Aluminum Handlebar Clamps in Hand Brushed Finish. The 13 piece kit, 4 clamps,  come with clamps, mounting hardware, allen wrench and instructions.  These carefully hand brushed 1″  handlebar diameter clamps will compliment the looks of your motorcycle and replace the cheap, unattractive looking OEM clamps.  The 4 clamp set covers the holes left after removing the OEM plastic clamps, entirely.

Currently not available….

Additional DescriptionMore Details

The picture shows 2 clamps, however, 4 COMPLETE CLAMPS PLUS ONE HEX WRENCH WILL SHIP WHEN YOU ORDER THIS ITEM

Price: $ 50.00

Handlebar Wiring Clamps (4) (Machined All Over Finish)

Handlebar Wiring Clamps (4) (Machined All Over Finish)

Flipmeisters Billet Aluminum Handlebar Clamps Replace your unattractive, cheap looking, OEM plastic wire clamps with Flipmeisters Billet Aluminum Handlebar Clamps. These beautifully machined  all over clamps….. our machining process results in a polished looking finish….. are designed in 2 pieces with a recessed stainless bolt that connects the two halves together from the underside of the clamp. When bolted together, the seam is practically invisible and the clamp looks like one solid piece. These clamps will fit any brand of bike with 1″ diameter handlebars including Triumph R3, all models and years. The 13 piece kit, 4 clamps, come with clamps, mounting hardware, allen wrench and instructions.

Currently not available…..

Additional DescriptionMore Details

Though the picture shows 2 clamps, this kit consists of 4 CLAMPS AND ONE HEX WRENCH

Price: $ 50.00

Pannier Liners/Stiffeners with BLACK specialty fasteners

Pannier Liners/Stiffeners with BLACK specialty fasteners

Take the sag out of your bags The kit (for 2 Panniers) consists of 2 Peripheral Liners and 2 Lid Liners made from 0.125” Virgin High Density Polyethylene, heat formed to the exact shape of a new (OEM) Triumph Leather Pannier. The kit also comes with 24 Specialty Fasteners in black and complete step-by-step instructions.

Price: $ 50.00

Pannier Liners/Stiffeners with SILVER specialty fasteners

Pannier Liners/Stiffeners with SILVER specialty fasteners

Take the sag out of your bags The kit (for 2 Panniers) consists of 2 Peripheral Liners and 2 Lid Liners made from 0.125” Virgin High Density Polyethylene, heat formed to the exact shape of a new (OEM) Triumph Leather Pannier. The kit also comes with 24 Specialty Fasteners in silver and complete step-by-step instructions.

Price: $ 50.00

Pannier Reconditioning Service / Pannier Liner/Stiffener installation

Pannier Reconditioning Service / Pannier Liner/Stiffener installation

Flipmeisters is now offering a Pannier reconditioning service and/or liner/stiffener installation.  Whatever service you choose, you are responsible for the shipping charges & insurance both to Flipmeisters Specialty Products, LLC and return shipping charges to your address.

Basic installation of liner/stiffener kits start at $25.00 (includes reconditioning if purchased in conjunction with the liner/stifener kit).  Note:  additional services such as, but not limited to leather repairs, snap replacement, rivet setting and neatsfoot oil waterproofing/buffing are available at additional cost.  for further information and a price quote………

Please contact me (Flip) at sales@flipmeisters.com for specific pricing and service availability.

Price: $ 0.00

Polished Stainless Steel Radiator Insert (Rocket 3 Standard)

Polished Stainless Steel Radiator Insert (Rocket 3 Standard)

Replace your factory radiator screen and dress up the front of your radiator with the Flipmeisters Signature Polished Stainless Steel Radiator Insert designed specifically for the Rocket 3 Standard model, all years…. The R3 Standard Polished Stainless Steel Radiator Insert also fits the new Triumph Rocket 3 Roadster….  The Flipmeisters Polished Stainless Radiator Insert is precision laser cut from domestic 303 Polished Stainless Steel sheet and custom formed to fit over or replace the OEM screen.

New lower pricing due to reduced stainless costs……  Was $124.99  Now…….$89.82

In stock for immediate shipment

Old Price: $ 124.99

Price: $ 89.82

You save: $ 35.17

Sale

Polished Stainless Steel Radiator Insert (Rocket 3 Touring)

Polished Stainless Steel Radiator Insert (Rocket 3 Touring)

Replace your factory radiator screen and dress up the front of your radiator with the Flipmeisters Signature Polished Stainless Steel Radiator Insert designed specifically for the Rocket 3 Touring model, all years. The Flipmeisters Polished Stainless Radiator Insert is precision laser cut from domestic 303 Polished Stainless Steel sheet and custom formed to fit over or replace the OEM screen.

New lower pricing due to reduced stainless costs…… Was $124.99 Now…….$89.82

In stock for immediate shipment

Old Price: $ 124.99

Price: $ 89.82

You save: $ 35.17

Sale

Polished Stainless Steel Radiator Insert, (Rocket 3 Classic)

Polished Stainless Steel Radiator Insert, (Rocket 3 Classic)

Replace your unattractive readiator screen and dress up the front of your radiator with the distinctive, Flipmeisters Ploished Stainless Steel Radiator Insert, designed speciifically for the Rocket 3 Classic, all years.  The Flipmeisters Polished Stainless Steel Radiator Insert is precision laser cut from mirror polished domestic 303 stainless steel sheet and is custom formed to fit over or replace the OEM radiator screen.

New lower pricing due to reduced stainless costs…… Was $124.99 Now…….$89.82

In stock for immediate shipment

Old Price: $ 124.99

Price: $ 89.82

You save: $ 35.17

Sale