Introducing the Flipmeisters Signature Paddock Stand, Revision 4 for the Rocket 3, ALL MODELS THROUGH LATE 2007 Our proprietary designed stand is fabricated from Laser Cut steel and provides a convenient stand for routine maintenance or long term storage with the weight of the motorcycle relieved from the suspension. The Revision 4 stand has removable securement pins on both ends allowing for even easier placement and removal. The Revision 4 Paddock Stand has extended pins that accomodate the entire range of lug hole spacing.....
The Revision 4 Paddock Stand will fit any motorcycle (R3) so long as the outside dimension of the forged steel boss is 13.25" (13 1/4") or less. If your outside dimension is more than 13 1/4" (13.25"), I will be happy to fabricate a custom dimension at no additional cost to you. Please e-mail with your requirements firstname.lastname@example.org
The Paddock Stand is designed to be driven with an ordinary 1/2" square drive forged steel long handle breaker bar and because of the design, the breaker bar drive can be removed after the motorcycle is elevated allowing unobstructed access to the motorcycle without any obstructing lift handles in your way.
Late model R3's, built after late 2007 with through holes less than 1/2" (13mm) (0.500"), the through holes will require drilling with an ordinary twist drill to the required dimension of 1/2" (13mm 0.500"). Prior to ordering, please check your lug hole dimension to insure that it is 1/2" (13MM). If the lug boss holes are smaller than 1/2" (13mm) please order the late model stand with 1/2" drill bit included if, you do not have the required drill on hand to enlarge the lug boss holes.
Estimated shipping weight is 12 pounds per unit, packaged for shipment.
In stock for immediate shipment